Core

(2 comments)

Bios Bios (Photo credit: Henrique Vicente)

 

I'm a big fan of the stage3 install method.

 

Prepare partitions, format filesystems and make a mount point. Extract a root filesystem into place. Add a kernel and boot loader, reboot and done. The rest is configuration.

 

 

Depending on the platform, where the kernel resides and what the bootloader does to boot the new rootfs can vary dramatically.

 

x86 (BIOS)

 

BIOS loads the first 512 bytes of the primary disk into memory and executes it. Those instructions are the bootloader itself which is then responsible for finding and running the kernel, which in turn finds the rootfs and runs init. I'm ignoring extra stages like initramfses or Xen hypervisors.

 

ARM (e.g. Raspberry Pi) and other embedded systems

 

Hardware scans for a bootloader in some specific place (typically there isn't a "first disk" like the x86 sequence). That bootloader, in the Raspberry Pi example, is the GPU firmware which then activates the ARM CPU to run the kernel, which probes hardware to find the rootfs.

 

Xen PV (e.g. Amazon AWS)

 

Boot is described by a text file (previously a python script) which contains definitions for the kernel, filesystems, network and virtual hardware. In PV mode, the Xen userland tools are the bootloader which runs the provided kernel in an unprivilaged domain. IO to the guest is provided through Xen to the Dom-0 transparently.

 

Xen PV mode has an option to use a modified grub as the loaded kernel which can boot from a kernel that resides inside the rootfs. There is also a HVM mode which provides full hardware emulation. This uses the BIOS (or EFI) method. This is also true for virtualization provided by VMWare, VirtualBox and some modes of qemu.

 

PV and HVM modes are no longer binary modes. There is a spectrum of virtualization that mixes PV and HVM, but the differences manifest once the guest has booted.

 

EFI (UEFI, including secure boot)

 

EFI is an extensible successor to BIOS for x86-like platforms. EFI looks for a specially marked filesystem, typically formatted with the FAT filesystem and searches for the bootloader using a search list of expected file. names. The bootloader is not limited to 512 bytes and EFI provides many more functions that the loader can make use of. EFI systems are most easily recognised by the use of a GPT partitioning scheme, however some BIOS bootloaders are GPT aware.

 

Qemu/KVM

 

This is similar to Xen PV mode in that the kernel to be booted resides outside of the rootfs. Typically, it is provided as command arguments instead of from a configuration file.

 

Containers (e.g. LXC)

 

A container does not run a kernel of it's own. Instead it should be an isolated section of the host that can run an init process without the faff of bootloaders and kernels.

 

PXE

 

This boot method involves retrieving the boot components from the network. (Virtual) Hardware begins by broadcasting for an IPv4 address, server location and filename to download and execute. This can be used as a rescue boot method of last resort if a machine was unable to boot using locally available methods, as a way to provision a common OS environment to a group of hosts or to run diskless nodes in a terminal server configuration. The rootfs could be a locally installed block device or a network resource such as an NFS share.

 

No matter what method is used to boot a computer, the goal is to reach an environment that is running the rootfs. A system can be booted using any of the methods above, what defines a Linux distribution is the rootfs.

 

In Gentoo, this rootfs is provided as a stage3 tarball that is extracted and configured to the user's requirements. The Gentoo project provides a series of tarballs tailored for specific architectures.

 

For Debian based systems, there is the debootstrap script which creates a Debian rootfs on demand. This rootfs can be treated exactly the same way as an extracted stage3 and needs a kernel and bootloader to be configured.

 

Recently, I came across another just-a-rootfs method of installing a distro. A much less publicised part of an Ubuntu release is the "core" tarball. This is analogous to a stage tarball for Gentoo. Extract, add a kernel and boot it.

 

Ubuntu has never made as much sense to me until I found these tarballs.

 



 

Currently unrated

Comments

Base | Fragments 1 year, 2 months ago

[…] ← Core […]

Link | Reply
Currently unrated

AMI | Fragments 1 year, 2 months ago

[…] way that “bare-metal” and traditional virtualisation system use. As I have discussed before, they may not even be using a boot loader. This has a dramatic effect on the way cloud servers […]

Link | Reply
Currently unrated

New Comment

required

required (not published)

optional

Recent Posts

Archive

2014
2013
2012
2011
2010

Categories

Authors

Feeds

RSS / Atom